Steve
New arrival
Posts: 3
|
Post by Steve on Apr 24, 2005 9:25:02 GMT -7
I want to modify the engine a bit to reduce nose weight, I need a Supe tiger 46 needle valve assembly, a Venturi and a lighter muffler, O.K this where you guys come in where do I get this stuff and what are your recommendations.
The engine is going into a P40 ARF.
Regards
Steve
|
|
Cary
New arrival
Posts: 3
|
Post by Cary on Apr 25, 2005 7:00:21 GMT -7
I would wander over to Stuka Stunt works. Leonard can fix you up with what you need.
Cary
|
|
|
|
Post by jehold66203 on Apr 26, 2005 8:12:59 GMT -7
If Stuka Stunt Works can't help you, try Tower Hobbies. DOC Holliday
|
|
|
|
Post by ferocious on May 30, 2005 10:59:09 GMT -7
for real weight reduction, spend a couple hours with a Demel tool and a grinding burr and take an ounce off the outside of the case.
Use almost any chip muffler to save a couple ounces over the stock can.
|
|
